KELMAPLAST cable protection tapes protect underground cables and pipes from mechanical damage perfectly, simply and permanently.
These ecofriendly polyethylene products are the alternative to protective covers and cover plates and come with a long list of advantages. Simply unreeled in the trench, they save time and money and keep the filling material separate from the sand bed, thus preventing stones and gravel from working their way in and also displacement from occurring during compaction. Irrespective of the material thickness, every cable protection tape can be walked on while it is being laid and dug up again, and the smooth surface also makes guiding the excavator bucket easier.
KELMAPLAST cable protection tapes are also resistant to all influences in the ground and their permanently legible print permit clear identification of both the type of utility line and its owner. Perforations allow humidity to pass through, thus preventing any undesirable build-up of heat.
The tape is available in thicknesses of 0.25 mm to 4 mm with a tolerance of ±5 %. The reel lengths of between 20 m and 100 m are adjusted to a maximum weight of 30 kg with a tolerance of ± 0,5 m in accordance with regulations.
KELMAPLAST Cable Protection Tape No 08 – in accordance with DIN 54841-5
This particular tape is suitable for the most common areas of application and, coming in thicknesses of between 1.5 mm and 3 mm, it also passes the mandatory dart drop impact test, which simulates the damage potentially caused by spades, pickaxes and sharp-edged filling material.
Technical features
Elongation: ≥ 300 %
Temperature stability: -20 °C to +70 °C
Chemical stability
No change in colour after 24 hours of exposure to:
10 % nitric acid
20 % sodium carbonate solution
20 % ammonium iron sulphate
| WIDTH (± 2 %) |
|---|
| 100 mm to 800 mm in steps of 50 mm |
| Other dimensions and colours on request. Standard colours: yellow and red; the standard print colour is black. |
| Thickness: > 1,0 mm – 4,0 mm |
Dimensions | Dimensions |
|---|---|---|
| 1,5 mm x 100 mm x 100 m | 2,0 mm x 100 mm x 100 m | |
| 1,5 mm x 150 mm x 100 m | 2,0 mm x 150 mm x 100 m | |
| 1,5 mm x 200 mm x 100 m | 2,0 mm x 200 mm x 50 m | |
| 1,5 mm x 250 mm x 50 m | 2,0 mm x 250 mm x 50 m | |
| 1,5 mm x 300 mm x 50 m | 2,0 mm x 300 mm x 50 m | |
| 1,5 mm x 400 mm x 50 m | 2,0 mm x 400 mm x 25 m | |
| 1,5 mm x 500 mm x 30 m | 2,0 mm x 500 mm x 25 m | |
| 1,5 mm x 600 mm x 30 m | 2,0 mm x 600 mm x 25 m | |
| 1,5 mm x 700 mm x 30 m | 2,0 mm x 700 mm x 20 m | |
| 1,5 mm x 800 mm x 25 m | 2,0 mm x 800 mm x 20 m | |
| Other dimensions on request! | ||
KELMAPLAST Cable Protection Tape No 09 – perforation possible up to 1 mm thickness
KELMAPLAST cable protection tape no 09 comes in thicknesses of 0.5 to 10 mm and was developed to complement no 08. It is perforated to allow the passage of humidity, thus preventing unwanted build-up of heat.
Technical features
Elongation: ≥ 300 %
Temperature stability: -20 °C to +70 °C
Chemical stability
No change in colour after 24 hours of exposure to:
10 % nitric acid
20 % sodium carbonate solution
20 % ammonium iron sulphate
| WIDTH (± 2 %) |
|---|
| 100 mm to 800 mm in steps of 50 mm |
| Other dimensions and colours on request. Standard colours: yellow and red; the standard print colour is black. |
| Thickness: > 0,5 mm – 1,0 mm punched & unpunched |
Dimensions | Dimensions |
|---|---|---|
| 0,5 mm x 100 mm x 100 m | 1,0 mm x 100 mm x 100 m | |
| 0,5 mm x 150 mm x 100 m | 1,0 mm x 150 mm x 100 m | |
| 0,5 mm x 200 mm x 100 m | 1,0 mm x 200 mm x 100 m | |
| 0,5 mm x 250 mm x 100 m | 1,0 mm x 250 mm x 100 m | |
| 0,5 mm x 300 mm x 100 m | 1,0 mm x 300 mm x 100 m | |
| 0,5 mm x 400 mm x 100 m | 1,0 mm x 400 mm x 50 m | |
| 0,5 mm x 500 mm x 100 m | 1,0 mm x 500 mm x 50 m | |
| 0,5 mm x 600 mm x 100 m | 1,0 mm x 600 mm x 50 m | |
| 0,5 mm x 700 mm x 50 m | 1,0 mm x 700 mm x 30 m | |
| 0,5 mm x 800 mm x 50 m | 1,0 mm x 800 mm x 30 m | |
| Other dimensions on request! | ||
KELMAPLAST Cable Protection Tape No 02 – Fabric Reinforced
The “muscleman” among KELMAPLAST cable protection tapes – with fabric reinforcement for tear resistance. Despite being relatively thin – at a thickness of between .025 and 0.35 mm – this option has virtually the same technical and chemical properties as cable protection tape no 09. Thanks to its extreme flexibility, it is also more than easy to lay.
Technical features
Fabric: 200/25 scrim (polyester)
Elongation: ≥ 200 %
Tensile strength in accordance with DIN EN ISO 527-2: ≥ 20 N/mm²
Temperature stability: -20 °C to +70 °C
Chemical stability
No change in colour after 24 hours of exposure to:
25 % nitric acid
20 % sodium carbonate solution
20 % ammonium iron sulphate
| THICKNESS | WIDTH (± 2 %) | LENGTH (± 0,5 m) |
|---|---|---|
| 0,25 mm und 0,35 mm | 100 mm, 156 mm, 260 mm und 390 mm | 250 m |
| Other dimensions and colours on request. Standard colours: yellow and red; the standard print colour is black. | ||